With the new version easyDCP Creator+ 3.7.3 or higher, a significant increase in performance for Windows systems in GPU mode could be achieved with maximum values of up to 125fps.

System 1:

• Intel Core i9-9900K @ 3.60GHz 8 Cores
• 16 GB RAM
• Samsung SSD 970 EVO 1TB (NVMe M.2 SSD)
• NVIDIA GeForce GTX 1060 6GB 

System 2:

• AMD Ryzen Threadripper 2950X
• 64 GB RAM
• Samsung SSD 860 EVO 1TB
• NVIDIA GeForce RTX 2080 

System 3:

• AMD Ryzen 9 3900X 12-Core
• 32 GB RAM
• Samsung SSD 970 Pro 1TB (NVMe M.2 SSD)
• NVIDIA GeForce RTX 2080 Ti

Test results

The following settings were used in easyDCP Creator+ 3.7.3:

• Color Transform: RGB BT.709 nach XYZ (DCI)
• Maximum Bitrate: 250 Mbit/s

The source image material and the destination folder were in all cases on an SSD, if possible on an NVMe SSD.

easyDCP Creator+, easyDCP JPEG 2000 Transcoder are highly optimized for running on multi-processor/multi-core machines. On Windows and from easyDCP Creator(+) 3.3.X can also use one or more CUDA® enabled graphics devices.

We recommend the following minimal system configuration:

• Windows PC (Windows 64 bit, Version 7 or higher) or Intel Mac (Mac OS X 64 bit, Version 10.7 or higher)
• You also need a minimum of 2 GB RAM
• Installation occupies 200 MB free disc space
• Fast hard disk is also recommended

For best performance, opt for the following specifications:

• CPU with 6 cores or more
• 8 GB RAM
• Fast SSD
• A CUDA-enabled graphics device for encoding with the following specifications:
  
  • Compute Capability 2.0 or higher
  • Minimum of 1 GB memory, better 4 GB of memory
  • Preferably connected with 16 PCI Express lanes
  • The more cores, the better
  • E.g. NVIDIA GeForce 980 Ti